Working
UL LISTING:
PRODUCT CERTIFICATION
1) STEEL PANEL FRAMES
A) PANEL FRAME MODELS: PF, PFS AND PDF WITH PROVISION FOR POWERED AND
NON-POWERED BASE.
B) PANEL FRAME PRODUCT SERIES NUMBERS PF4218 TO PF8348, PFS 0918 TO PFS1860, AND
PDF8324 TO PDF8348.
PANEL FRAME SERIES (PF, PFS, PDF) TESTED TO ANSI/ BIFMA X5.6-2003 PANEL SYSTEM
STANDARDS. TEST DATE (02/15/2007) INTERTEK ELT SEMKO, GRAND RAPIDS, MI 49548.
2) PANEL SEGMENTS
A) PANEL SEGMENTS MODELS: PSNT, PST, PT, PSP, PSE, PSD, PSW, PSA, PSG, AND PSFG.
B) PANEL SEGMENT SERIRES NUMBERS PSNT1418 TO PSNT2448, PNT4218 TO PNT6548,
PST1418 TO PST2448, PT4218 TO PT6548, PSP1418 TO PSP2448, TO PSE2418 TO PSE2448,
PSD1424 TO PSD1814, PSW1424 TO PSW2448, PSA1818 TO PSA2448, PSG1418 TO PSG1848,
PSFG1418 TO PSFG1848, AND ALL PNLCF, PNLCGF, PNLCG, PNLCP.
PANEL SEGMENT SERIES LISTED ABOVE WERE TESTED TO ANSI/ ASTM E84-05 SURFACE
BURNING CHARACTERISITICS OF BUILDING MATERIALS. THE FABRIC TESTED WAS IN
COMPLIANCE WITH THE U/L FABRIC RECOGNITION PROGRAM AS NOTED IN U/L 723. TEST
DATE 01/23/2007 SY INTERTEK TESTING SERVICES NA, INC., ELMENDORF, TX 78112.
ATTACHED EXHIBITS PROVIDE FLAME SPREAD AND SMOKE DEVELOPMENT RESULTS. 100% OF
THE PANEL FABRICS PROVIDED BY COMPATICO ON ITS PRODUCTS ARE TESTED AND COMPLY
WITH NFPA 701. TESTING AND COMPLIANCE IS CONTROLLED BY THE MANUFACTURERS OF
THOSE FABRICS. (GUILFORD OF MAIN, 5300 CORPORATE GROVE DRIVE, SE, GRAND RAPIDS,
MICHIGAN 49512, PHONE 1-800-445-8938) (BURCH FABRIC GROUP, 4200 PROCKTON DRIVE
SE, GRAND RAPIDS, MICHIGAN 49512, PHONE 1-616-698-2800) (C.F. STINSON, 2849
PRODUCT DRIVE, RODCHESTER HILLS, MI 48309. PHONE 1-800-841-6279) THE PST SERIES
WAS TESTED TO ASTM C423-02a STANDARD TEST METHOD FOR SOUND ABSORBTION AND SOUND
ABSORBION COEFFICIENTS. SEE ATTACHED EXHIBIT.
3) PANEL HARDWARE, TRIM AND
CONNECTORS
PANEL TOP CAPS, PANEL END COVERS, PANEL BASE COVER KITS, INLINE, TWO WAY 90
DEGREE, TWO WAY 180 DEGREE, THREE WAY, FOUR WAY CONNECTORS, WALL STARTER WALL
TRACK, AND T-MOUNT KIT.
A) CONNECTOR MODELS PC29, PC3, AND PC4.
B) PANEL TOP CAP MODEL PTC18-PTC60, AND PCTC.
C) PANEL BASE COVER KITS PBC18-PBC60.
D) PANEL TRIM KIT MODEL EC42-EC83, ECV06-ECV35, PCV2906-PCV29035, AND
PCV306-PCV335.
E) WALL STARTER, WALL TRACK, AND T MOUNT MODELS WT, WST, AND TMK.
PANEL HARDWARE, TRIM, AND CONNECTORS WERE TESTED TO ANSI/ BIFMA X5.6-2003, AND
UL-94V-0. TEST DATE 1/23/07.
4) SYSTEM ELECTRICAL 8 WIRE/ 4
CIRCUIT DISTRIBUTION
SINGLE AND DUAL POWER BLOCK ASSEMBLY, PASS THROUGH JUMPER, CEILING FEED, END
FEED, SIDE ENTRY FEED, DUPLEX RECEPTACLE, PANEL JUMPER, AND CEILING ENTRY POLE.
A) POWER ASSEMBLY MODELS PR24-PR60, INTERCHANGES WITH HMP551.2400-HMP551.6000.
B) PASS THROUGH MODEL NUMBERR PT24-PT60, INTERCHANGES WITH
HMP551.2400-HMP556.6000.
C) CEILING FEED MODEL NUMBER PF, INTERCHANGES WITH HMP558.4400 AND HMP558.8000.
D) SIDE ENTRY MODEL NUMBER PE, INTERCHANGES WITH HMP565.7200.
E) RECEPTACLE MODEL NUMBER R1-R4, AND RS4, INTERCHANGES WITH
HMP555.01BK-HMP555.04BK.
F) OPTIONAL ACCESSORIES MODEL NUMBER PENY, CJB, AND DPAK.
SYSTEM ELECTRICAL IS U/L LISTED, AND/ OR RECOGNIZED TO U/L 1285 FILE E183498 ON
GOING PRODUCT REVIEW PERFORMED BY UL EVERY 90 DAYS. LAST IPI 01/2007.
5) WORKSURFACES, COUNTER CAPS
SUPPORT PANELS, SUPPORT LEGS, SUPPORT CANTILEVERS, AND SUPPORT BRACKETS.
A) WORKSURFACE MODEL NUMBER WSS2424-WSS2472, WSS3024-WSS3072, CWST2436-CWST3048,
PSWT3060-PWST3072, CWC2436-CWC3048, CWE2445L-CWE3046L, CWE2445R-CWE3046R,
CWEC2345L, CWEC2346L, CWEC2345R, CWEC2346R, PWE2466L, PWE2472L, PWE2472R,
TWE2446L, TWE22447L, TWE2446R, TWE2447R, WS2424-WS2472, WS3030-WS3672,
CWS2436-CWS3042, PWS3036-PWS3072, PWS3060-PWS3070, EWS48, TWS30, TS24-TS72,
TST24-TST72.
Search
